ASTRO WM-3014 Bedienerhandbuch PDF herunterladen (Seite 13)

CONCERNING THE WM-3014

The WM-3014 is a compact, lightweight and portable LCD waveform monitor which comes in handy for monitoring the

pictures being shot during live broadcasts, on location or in studios.

The camera battery is supported as the power supply so that pictures, waveforms and sound can now be monitored

even in locations where it would be difficult to carry in equipment.

A full range of functions is provided including functions for adjusting the brightness, contrast and chroma levels as well

as functions for displaying markers.

Input signals in a total of 23 HDTV and two SDTV video formats as well as NTSC and PAL composite input signals are

supported. In regard to the PAL signals, however, the waveforms of the 3 lines each at the start and end of the video

signals will be more disturbed than in actuality.

Outline of WM-3014

 6.3-inch a-Si TFT LCD panel featured

 HD-SDI, SD-SDI or YPbPr HD analog signals supported as the input

 25 different video formats supported

Standards complied with by HD-SDI signals: SMPTE 292M, BTA S-004B standards

(1.485 Gbps SDI input)

Standards complied with by SD-SDI signals: SMPTE 259M standard (270 Mbps SDI input)

Standards complied with by analog input and supported formats:

SMPTE 274M, SMPTE 296M, BTA S-001B standards

Composite input (NTSC: SMPTE 170M, PAL: ITU-R.BT624-4 complied with in part)

 SDI IN (×2), SDI MONITOR OUT, HD analog input (ANALOG Y, ANALOG Pb,

ANALOG Pr) and composite input (NTSC, PAL) connectors provided

* When composite signals are input, the waveforms displayed are the waveforms which appear after the

component signal conversion. In regard to the PAL signals, however, the waveforms of the 3 lines each at

the start and end of the video signals will be more disturbed than in actuality.

 Image adjustment functions

Brightness adjustment function (brightness can be adjusted separately for G, B and R) ±50%

Contrast adjustment function (contrast can be adjusted separately for G, B and R) 0 to 200%

Chroma level adjustment function 0 to 200%

Chroma boosting function

Separate ON/OFF functions for G, B and R

Peak function

Chroma signal OFF function

Gamma adjustment function (gamma can be adjusted separately for G, B and R)

 Marker displays

Center marker, frame marker, safety markers (95%, 93%, 88%, 80%)

Markers for down-conversion (4:3, 13:9, 14:9)

Markers for cinema formats (2.35:1 Cinemascope, 1.85:1 Cinema Vista, 1.66:1 Euro Vista)

User variable markers

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 94 95

Keine Kommentare

ASTRO WM-3014 Bedienerhandbuch Seite 13