ASTRO WM-3001 Bedienerhandbuch PDF herunterladen (Seite 29)

latest settings of these options are also cancelled if you attempt to readjust the settings after

turning off the power. To keep the Pb (Cb) and Pr (Cr) levels in memory for a prolonged period,

save the individual Pb (Cb) and Pr (Cr) settings when you set them up separately.

 CHROMA ON/OFF: This option turns on or off the CHROMA setup item.

 OVERLAY CONT: This option outputs an overlay picture in modes other than the menu mode at

the valued of a pre-adjusted picture (NORMAL) of the CONTRAST setup item. You

can also output the picture with the value of CONTRAST always decreased to 25%

(DIM).

 WAVEFORM: You can switch between the Y/Pb/Pr (YCbCr) settings and G/B/R settings for the

waveform on display. Note however that YPbPr (YCbCr) is represented as YP (CP).

 SCALE: Switches the scale of waveform displays between % and V.

 COLOR BAR: Switches between the 100% and 75% options for the marker of a vectorscope

display.

 ERROR RESET: Resets the error count.

 LOAD SETTING: Calls up the saved settings.

 SAVE SETTING: Saves settings.

During saving, the text "WORKING" appears in reverse video. Do not turn off the power

before this indication goes out.

Note: Once the power is turned off, the settings of the monitor are those that were saved last. (If no

settings have been saved, the monitor reverts to the default settings.) It is advisable to save the

latest settings before you turn off the power.

 INIT SETTING: Initializes the settings.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 45 46

Keine Kommentare

ASTRO WM-3001 Bedienerhandbuch Seite 29